Black – 1 Yard – Siser Easyweed Heat Transfer Vinyl
Description
EasyWeed® Heat Transfer Vinyl
Why is EasyWeed our number one selling heat transfer vinyl? Simple, the EasyWeed Advantage! EasyWeed applies at a lower temperaturethan competitor material, backing can be peeled hot or cold and doesn’t lift during weeding. It’s also extremely durable wash after wash anduses a lower pressure setting for application. EasyWeed is thinner than others on the market and offers a one-second tack application that’sgreat for multiple layers. EasyWeed has a pressure sensitive carrier that allows you to offer detailed designs on a wide variety of fabrics.EasyWeed can be cut with laser cutting systems.
EasyWeed is CPSIA Certified so it’s perfect for decorating children’s clothing and accessories.
Specifications:
- PU Composition
- Pressure sensitive backing
- Semi-gloss finish
- 90 Microns/3.5 Mils
- 45°/60° blade
- Can be layered
Cricut:
- Blade: Standard
- Setting: Iron-On
Silhouette Cameo:
- Blade: Standard, 3
- Setting: Heat Transfer
- Material: Smooth
- Speed: 8
- Force: 6
Scan N Cut:
- Blade: Standard, 2
- Cut Speed: 1
- Cut Pressure: 1
Roland GS/GX-24:
- Blade: 45°
- Gram Force: 80-90
- Offset: .250
- Speed: 25-50 cm/s
Graphtec:
- Blade: 45°
- Gram Force: 8-9
- Tool: CB09U 0
- Speed: 30 cm/s
EasyWeed applies to:
Siser Cutter Settings
Blade:45°/60° Gram Force: 5-10 Offset: .250 Speed: 10
Click here to download a .pdf of settings for other cutters.
Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.
Application Instructions
Application instructions (home iron)
- Set iron dial between Cotton and Linen
- Cover design with Kraft paper or non-stick cover sheet
- Place on flat, hard surface (ironing board not recommended)
- Press iron with medium/firm pressure (do not slide iron)
- Press each section of design for 10-15 seconds
- If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
- Peel carrier hot or cold
Application Instructions (heat press)
- Cut in reverse
- Weed excess material
- Preheat garment for 2-3 seconds
- Apply design at 305°F/150°C
- Use medium pressure for 10-15 seconds
- Peel carrier hot or cold
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.