Apricot – 10 Yards – Siser Easyweed Heat Transfer Vinyl
n10 Yards – 15″ x 10 Yards (30 Feet) – $65.10
n
n(+/- tolerance of 1/4″)
n
n
n
n
n
n
n
Description
n
EasyWeed® Heat Transfer Vinyl
n
The most trusted heat transfer vinyl brand in the world
nWhy is EasyWeed our number one selling heat transfer vinyl? Simple, the EasyWeed Advantage! EasyWeed applies at a lower temperaturethan competitor material, backing can be peeled hot or cold and doesn’t lift during weeding. It’s also extremely durable wash after wash anduses a lower pressure setting for application. EasyWeed is thinner than others on the market and offers a one-second tack application that’sgreat for multiple layers. EasyWeed has a pressure sensitive carrier that allows you to offer detailed designs on a wide variety of fabrics.EasyWeed can be cut with laser cutting systems.
n
nEasyWeed is CPSIA Certified so it’s perfect for decorating children’s clothing and accessories.
n
Specifications: PU Composition • Pressure sensitive backing • Semi-gloss finish • 90 Microns/3.5 Mils • 45°/60° blade • Can be layered
n
Cricut:
n
nBlade: Standard
nSetting: Iron-On
Silhouette Cameo:
n
nBlade: Standard, 3
nSetting: Heat Transfer
nMaterial: Smooth
nSpeed: 8
nForce: 6
Scan N Cut:
n
nBlade: Standard, 2
nCut Speed: 1
nCut Pressure: 1
Roland GS/GX-24:
n
nBlade: 45°
nGram Force: 80-90
nOffset: .250
nSpeed: 25-50 cm/s
Graphtec:
n
nBlade: 45°
nGram Force: 8-9
nTool: CB09U+0
nSpeed: 30 cm/s
n
Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.
n
Application instructions (home iron)
n
n• Set iron dial between Cotton and Linen
n• Cover design with Kraft paper or non-stick cover sheet
n• Place on flat, hard surface (ironing board not recommended)
n• Press iron with medium/firm pressure (do not slide iron)
n• Press each section of design for 10-15 seconds
n• If areas of design lift after application, replace cover sheet
nand re-press for 5-10 seconds
n• Peel carrier hot or cold
Application Instructions (heat press)
n
n• Cut in reverse
n• Weed excess material
n• Preheat garment for 2-3 seconds
n• Apply design at 305°F/150°C
n• Use medium pressure for 10-15 seconds
n• Peel carrier hot or cold
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.